The incorrect installation of the foundation will cause the building to become unstable in strength. Usually, it can be detected from the quality of cracked walls and cracked floors with uneven surfaces. We recommend that on this foundation-making plan, there is nothing wrong if you use the services of an architect or civilian as a consultant who can provide advice in choosing the right type of foundation and installation method. Meanwhile, perhaps you also need to check out the recommended Dallas Foundation Repair near your area.
Here are the several tips to Build a Home Foundation:
Preferably before installing the foundation, determine in advance the size and shape of the plan that will be fitted with the foundation.
Make a bow plank or building board as a benchmark to determine the midpoint (point of as) of the column body, and to determine the elbow point of 90 degrees on the column body.
Extracting the foundation holes needed. Excavation sites should be carried out on hard soil texture types. If the soil texture is not too hard, then it must dig deeper.
If the location where the house is built has land that is very soft or the condition of the location is a former dug site or the position is in a hilly location it is better to consult with architects or civil consultants to get information about the type of foundation recommended. This is necessary so that the building can still be built by following the feasibility of the permitted building structure.
If you decide to use stone or brick type foundations, how to build a house foundation that will be applied should use an installation technique that refers to the bowpank point that has been made. The standard commonly used as a measure of depth is as deep as 4 layers of red brick.
When installing when building a house foundation, the installation technique must be followed by referring to the triangle shape. The bottom of the foundation is installed with a widened shape. The upper part of the cone can use the size of one brick that has a size of around 20 cm.